(solved) Holding calls auto disconnect after 1 minutes
litensten:
During a conversation, if I click flash then hangup, I can put the other party on hold (they hear nice music and I get a periodic holding ring).
However after exactly 60seconds the other party gets disconnected.
Does anyone know how I can tweak this auto disconnect time? Maybe to 5 minutes?
Thanks
NVM, I solved it. Just tweak the ring duration and problem solved.
CoalMinerRetired:
I got curious, searched the admin manual and did not find a setting.
I'll make a guess this is controlled by your SIP provider. I got even more curious and looked at CallCentric, a SIP provider I use, they have no setting that I could find to control this. CC does support call waiting, which is closely related to Call on Hold, so I'm not sure if or how they control it.
Check the settings (CC calls it a dashboard) for your SIP provider?
litensten:
Tried the following, still doesn't work.
1. I talked with voip.ms. They think its Obi. But I sent them another email regarding their rtpholdtimeout setting and see what they'll say.
2. I tried setting RTP KeepAliveInterval to 30, 10, 3, and 1. (this is suppose to fix the issue, it didn't.)
3. I tried set different service provider to Anveo.com, same result.
4. I tried enabling KeepAliveServer (under SP1).
5. I tried direct connection to internet (no router).
6. I am using the latest firmare 3.0.1 (Build: 3932)
Any other ideas?
What about this "DSCPMark" setting?
Or the bunch of Timer setting under ITSP Profile-SIP?
Shale:
See
http://www.obihai.com/FAQ.php#cant-hear-1stCall-Switchfrom-2ndCall
Is that what you already did?
litensten:
Yup, doesn't work.
Can anyone put call on hold longer than 1 minute?
Just want to know if its my problem or obi.
Note: Call waiting isn't affect by this 1 minute cutoff. eg. You are on the call with A and put B on hold, B will not get cutoff.
Navigation
[0] Message Index
[#] Next page