Hi I have 2 units 1 Obi 110 and 1 Obi 202.
I ported my 2 local number to a SIP that allowed me to put my local number on any of my OBis.
In my country my Area codes are 809,829 and 849. Mobile phones are considered long distance and you are charged, Mobile need to be dialed with a 1809 XXX XXXX and local numbers are dialed 809 XXX XXXX.
My setup is 1 GV+ 1 Local SIP number on both OBis (1 Obi110 and 1 OBi 202)
In both of my OBi's with GV everything is fine but on my Local SIP I can only call mobile numbers.
In : ITSP Profile A/B >> General – DigitMap
Default is:(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
I need to make a rule that all numbers dialed with out 1 "809-XXX-XXXX the 1 is not added.
Something like:
(1[2-79]xxxxxxxxx|<1>[2-79]xxxxxxxxx|123456789|011xx.)
Rule says accept: eleven digit numbers starting with "1″ | ten digit numbers starting with 2 through 7 or 9 and then pre-pend with "1″ before placing the call | the nine digit SIP number "123456789″ | or international calls starting with "011″
But it does not work, I must be doing something wrong.
I also tried
(1[2-79]xxxxxxxxx |<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
If any one has the Knowledge it would be appreciated.
Thanks for the correction, I just wan't to dial local numbers on these 2 SIP Lines.
Thanks in advance.