SP1 disabled

<< < (2/2)

YongChen:
Problem goes away after cold reboot.
Thanks,

AndrewHoly:
I was also having the same problem,i tried rebooting but it was of no use. I am still facing the error.

Shale:
Quote from: AndrewHoly on September 14, 2013, 01:57:34 am

I was also having the same problem,i tried rebooting but it was of no use. I am still facing the error.


What is "the error"?

I suggest you read http://www.obitalk.com/forum/index.php?topic=92.0
It is unclear where you are making your attempted changes.

DrewMan:
I am having this same issue.  I disabled SP1 in the Expert Config menu on the Obitalk portal.  When I go back in to re-check (re-enable) and submit... the page just refreshes with the box still unchecked.  I have tried deleting SP1 config and re-setting up the service (Vestalink).  Have also tried a cold reboot of the Obi 200.  Have also tried several browsers.

Any ideas please?

DrewMan:
Ok.. silly me... solved the problem by connecting to my Obi via IP and disabling auto provisioning for the Obitalk portal.  Then enabled SP1 (still on web IP connected to Obi... not through Obitalk portal).  And it took.  Guess the Portal was overwriting my changes.  Sorry to bother all.

Navigation

[0] Message Index

[*] Previous page