HKBN 2B Obi110 or OBi100 settings
baor:
Quote from: obi-support2 on April 09, 2011, 08:51:01 pm
You can run a syslog server on your PC.
On the OBi, under SP1/SP2 Service, enable X_SipDebugOption.
Under Device Admin, point Debug Server and port to the IP address and
port of the PC where you run your syslog server.
This could be a SIP Interop issue. May be HKBN does not like our INVITE request.
Please email your capture log file to support@obihai.com and we should be able
to figure it out and do something about it.
To help you remotely trouble shoot the problem, all we need is your 9-digit OBI number;
and you must add your device to OBiTALK if you haven't done so yet.
Thank you.
I made the settings and reboot.
I tried the TFTPD software, nothing is going on???
What should I do now?
QBZappy:
baor,
Hi
You may need to port forward port 514 in your router to the IP of the server. I just made a test on my computer. You should see activity that the OBi is generating.
<See Image>
baor:
Quote from: QBZappy on April 09, 2011, 10:27:47 pm
baor,
Hi
You may need to port forward port 514 in your router to the IP of the server. I just made a test on my computer. You should see activity that the OBi is generating.
<See Image>
Could you how you set the software? Do I have to set the DHCP server? How?
QBZappy:
baor,
What is your router model name and number?
EDIT: Can you log on the the web page of your router?
baor:
Quote from: QBZappy on April 09, 2011, 10:30:58 pm
baor,
What is your router model name and number?
My router is Asus RT-N16. It is flashed with Tamagochi.
Do you have MSN or other Instant messeger?
It is all internal, why do I have to forward port????
Navigation
[0] Message Index
[#] Next page
[*] Previous page