HKBN 2B Obi110 or OBi100 settings
obi-support2:
If you're trying to use HKBN with the OBi, you may be interested to know that the latest f/w 1.2.1(2286) has some enhancement that should make it work better with HKBN.
On OBi web configuration page, set the new parameter X_ProxyRequire (under ITSP Profile A/B - SIP) to this value: com.nortelnetworks.firewall
You should also disable STUN and ICE when setting up this way.
NOTE: This parameter is not available in the OBITALK Expert Configuration yet. You must use the OBi's own web configuration page to make this change.
obi-support2:
Quote from: baor on April 11, 2011, 05:57:42 pm
We finally made some progress after OBIHAI Support suggested to turn off X_InsertRemotePartyID.
I could receive call and dial out. However I got cut off every 10 mins.
Does it have to do with X_KeepAliveExpires or RegistrationPeriod?
baor,
We have some idea why the call might be dropped by the server after 10 min or so.
If you still experience this call drop problem after 10 min, we can patch the
f/w on your unit so you can try out a fix we put in to deal with this issue.
Just send us an email at support@obihai.com w/ your unit's OBI number.
Thank you.
yhfung:
The full installation method for HKBN 2b on OBi device can be found in the following link:
http://www.obitalk.com/forum/index.php?topic=886.0
YH
baor:
Quote from: obi-support2 on May 14, 2011, 08:54:58 pm
If you're trying to use HKBN with the OBi, you may be interested to know that the latest f/w 1.2.1(2286) has some enhancement that should make it work better with HKBN.
On OBi web configuration page, set the new parameter X_ProxyRequire (under ITSP Profile A/B - SIP) to this value: com.nortelnetworks.firewall
You should also disable STUN and ICE when setting up this way.
NOTE: This parameter is not available in the OBITALK Expert Configuration yet. You must use the OBi's own web configuration page to make this change.
I have updated the firmware, it broke my service...
RX is not receiving any packet.
TX kept sending...
Update:
The web portal does not work with HKBN but it works when I configured it using the local login.
outie:
I wonder if someone can help, I've been using the Obitalk 110 with HKBN 2b fine for a long time. It was still working fine last month or so. However it seems like something happened and it stopped working. I just noticed this when mom told me she hasn't been able to make calls. I am getting this in the line status:
Register Failed: No Response From Server (server=203.80.89.135:5060; retry in 195s)
I have always been using s21.hkbntel.net. I have done the reset on pa.2b.com.hk as usual with no avail. I tried switching to s22, s23, but it just says "moved permanently" etc., which means they aren't the right servers for me.
Just to make sure my account is working, I downloaded the softphone and it logged in without issue. I was also able to make calls.
Is anyone else having issue with 2b and obi? Please help. Thanks!
Navigation
[0] Message Index
[*] Previous page