OBi202 new firmware?
YongChen:
Just to report back, I just did the (4041) upgrade through obitalk. I took about 3min, and it went fine. I can make calls with FPL and GV accounts. Still no clue what are the changes. Where are obi people? Why not provide a change log or something?
mikeck:
I had the same experience as meerkat. After upgrading to firmware 4041 I couldn't place or recieve calls. I couldn't downgrade the firmware and I couldn't access the device through obitalk. I could access it by putting it's local IP adress into my web browser 192.168.xx.xxx. You can get your device's IP address by dialing ***1 on your phone. Once I had access I changed static to DHCP in the settings under Router Configuration>WAN Settings. It works fine now but fails if I change back to a static IP
meerkat:
Now a new firmware 4109 is released, update seems OK (I did not test if the static IP configuration issue is fixed or not, broken by last firmware release 4041)
mikeck:
I tried a static IP with the new firmware just to try to be helpful. Static IP still doesn't work for me with firmware 4109. I don't really need the static IP option anymore. I appreciate the help, I don't think I would have found that DHCP was needed to make my obi work on my own.
Ostracus:
Leave dynamic on the Obi and set one's router to give a particular address every time it's queried.
Navigation
[0] Message Index
[#] Next page
[*] Previous page