Outbound OBiBT Calls Fail with new firmware

(1/2) > >>

NerdUno:
Had this working before, but outbound Bluetooth calls using OBi202 with latest firmware now fail with message "There is no call route available to complete your call." Incoming cell calls via same OBiBT Bluetooth connection still work fine. Same problem exists with both Verizon and AT&T phones using Galaxy S4 and Galaxy Note II.

Also tried a local configuration using the internal browser setup of the OBi202. It is only slightly better. Incoming calls still work as they should but, on outbound calls, the cellphone starts dialing after receiving the first 3 numbers of a 10-digit call. Any ideas??

panic888:
I got the same issue, the BT mobile only received the first three digit and never can make a call successfully.....

Shale:
http://www.obitalk.com/forum/index.php?topic=9.0 talks of how to download and install firmware.

http://www.obihai.com/firmware/ has some older firmware, but I am not stating that these would be good for you. I just don't know.

CLTGreg:
Quote from: NerdUno on August 04, 2013, 12:03:03 pm

Had this working before, but outbound Bluetooth calls using OBi202 with latest firmware now fail with message "There is no call route available to complete your call." Incoming cell calls via same OBiBT Bluetooth connection still work fine. Same problem exists with both Verizon and AT&T phones using Galaxy S4 and Galaxy Note II.

Also tried a local configuration using the internal browser setup of the OBi202. It is only slightly better. Incoming calls still work as they should but, on outbound calls, the cellphone starts dialing after receiving the first 3 numbers of a 10-digit call. Any ideas??


I got my 202 new last week and it came with the newest firmware. It behaves the same way and just like the thread in the other forum dialing the "1" in front solves the problem. If I dial 10 digits only the area code gets passed.

ianobi:
If several posters here respond, we may find a common problem.

This sounds like a digit map problem. Please post:

Physical Interfaces > PHONE Port 1/2 > PrimaryLine

OBiBlueTooth > DigitMap

Navigation

[0] Message Index

[#] Next page