Obi202 and Virtualpbx
Tschrock:
Has anyone been able to get an Obi202 to work with Virtualpbx? There are a few old threads showing that my problem of not being able to make outbound calls is a common problem. Inbound calls work fine. Has anyone gotten this to work?
Shale:
I don't know Virtualpbx, but these one-way problems are usually associated with router settings.
Try putting the OBi into the DMZ to see if that gets things working. There are specific ports you can address, but try DMZ first to prove the concept.
Tschrock:
I've put it directly on the modem, no router to go through. Inbound calls work fine but outbound calls do not go through.
RFord:
Quote from: Shale on August 20, 2013, 04:05:26 pm
I don't know Virtualpbx, but these one-way problems are usually associated with router settings.
Try putting the OBi into the DMZ to see if that gets things working. There are specific ports you can address, but try DMZ first to prove the concept.
The problem the OP is having is NOT a one-way audio problem and as such, is unrelated to the router. The problem is more than likely associated with the outbound call route and/or dial plan of the PBX system (Virtual PBX). The OP needs to explain in more detail what problems he is having and how is the problem manifesting itself.
Clive:
additionally, it could be something to do with the dial plan in the virtualpbx conflicting with the dial plan in the obi.
I've run an obi100 using 3cx pbx using the standard obi dial plan and it worked both ways.
Navigation
[0] Message Index
[#] Next page