Obi100 Alternating Red / Green

(1/4) > >>

MGeorge:
Hi Guys, My obi100 is showing alternating red/green lights. I tried upgrading the firmware as suggested in self troubleshooting (http://www.obihai.com/support/troubleshooting/trs5.html). But after update, its going back to alternating red/green. When i try to access the ip address, its showing me firmware update page again and again.

Right now, its showing alternating red/green for a while and the internet led is flashing fast. Then few seconds later the power led start flashing red for another few seconds and back to alternating red/green.

Some had similar experience?

Shale:

Here are some others:
https://www.obitalk.com/forum/index.php?topic=5259.0

Note that the OBi100 does not have a LAN port. A factory reset may do the trick.

http://www.obitalk.com/forum/index.php?topic=3261.0

MGeorge:
Quote from: Shale on August 26, 2013, 09:31:21 am


Here are some others:
https://www.obitalk.com/forum/index.php?topic=5259.0

Note that the OBi100 does not have a LAN port. A factory reset may do the trick.

http://www.obitalk.com/forum/index.php?topic=3261.0



Thank you Shale. Let me try my luck with the links you shared.

MGeorge:
I tried everything, still not being able to factory rest or firmware update. I tried contacting obitalk, but no response from them so far.

Shale:
Try downloading the Chrome browser, and using the Call OBi link at the upper right on http://www.obitalk.com/obinet/pg/obhdev/devices

When you install, make sure you don't let it make itself the default, unless that is what you want.

Navigation

[0] Message Index

[#] Next page