Line Port gives Busy Signal
ripclaw:
I have my home line plugged into the Line Port, but it gives the busy signal. It was working fine a couple of days ago. The line port used to light up but no longer does. When I dial my home phone, I get the busy signal. If I unplug the line port, the call goes through. I tried resetting the device, but no luck.
Under status I see,
Line Port Status:
On Hook
0 mA
0 V
--
lhm.:
Disconnect line, reconnect line. No joy, replace line with another to connect from Obi to land line.
ripclaw:
Tried that already. It works fine when I plug my phone into the home line.
RonR:
With the OBi powered off (wall-wart disconnected), does the busy condition go away and does the telephone conected to the OBi operate your landline correctly? The OBi telephone should be connected straight through the OBi to the landline with the OBi powered off.
ripclaw:
When I unplug it, I still get a busy signal. As soon as I disconnect it from the OBi110, the line rings again. If I plug the line into the phone directly, it works fine again.
Navigation
[0] Message Index
[#] Next page