Trouble with Credit Card terminal but faxing works great
QBZappy:
@obiliving,
Quote from: obiliving on September 13, 2013, 03:58:08 pm
There is a new feature in the latest firmware (3.0.1.4109) that may help (do a f/w upgrade first).
It allows you to disable jitter buffer adjustment for the next outgoing call, by dialing a *code (of your choice). This is what you can do: Add a Star Code (under Star Code Profile) like this:
*01, Modem Call, set($Noji1,200),set($Noec1,1),set($Cdm1,3)
The 3 set() commands tell the obi to do the following for the next outbound call:
1. Disable Jitter Buffer Adjustment, and use a fixed jitter buffer length of 200 ms
2. Disable Echo Canceller
3. Use only G711u and G711a codec
Where did you get this info from? Are there release notes available somewhere?
affled:
If I follow obiliving's example of adding those commands to *01 star code
could I get phone port 2 to automatically dial *01 if I add that to the digimap for the corresponding ITSP general profile?
eg: (<*01>1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
I'm trying to avoid reprogramming the verifone terminal since I don't know how...
So Phone 2 Primary Line is Sp2
StarCodeProfile is B (the one I added to)
Sp2 X_ServProvProfile = B
above digimap is for ITSP profile B
------------------------------------------------------------------------------------------
Or should I not alter DigitMap for ITSP profile B leaving it as:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
But add this to beginning of OutboundCallRoute in Phone port 2:
{(<1877#######:*011877#######>):sp2},{.......etc}
where 877####### is the credit card company's phone number
Keeping Phone port 2 Primary Line as Sp2
StarCodeProfile is B (the one I added to)
QBZappy:
@obiliving,
There is obviously some information regarding firmware updates available to you. As the only known obihai person participating in this forum, we have collectively decided to add to your job description the following task of maintaining the following thread:
Latest Update for OBi1 Series - OBi2 and OBi3 Series
http://www.obitalk.com/forum/index.php?topic=9.0
I cleared it with Jan Fandrianto (Obihai president and CEO) when I met him earlier this year at ITEXPO Miami 2013 . There will be a small bonus in your Christmas pay for the effort. I also took the liberty to add a donate button for your efforts as well. Note to forum readers, it would be a nice show of support if we hit that donate button to encourage obiliving to participate more often. BTW I don't know if we were introduced. Were you the tall guy exhibiting the new OBi phones coming out later in the year? :)
##########
# D O N A T E # <-- Click here
##########
Rick:
Quote from: QBZappy on September 13, 2013, 09:49:04 pm
@obiliving,
There is obviously some information regarding firmware updates available to you. As the only known obihai person participating in this forum, we have collectively decided to add to your job description the following task of maintaining the following thread:
Latest Update for OBi1 Series - OBi2 and OBi3 Series
http://www.obitalk.com/forum/index.php?topic=9.0
I cleared it with Jan Fandrianto (Obihai president and CEO) when I met him earlier this year at ITEXPO Miami 2013 . There will be a small bonus in your Christmas pay for the effort. I also took the liberty to add a donate button for your efforts as well. Note to forum readers, it would be a nice show of support if we hit that donate button to encourage obiliving to participate more often. BTW I don't know if we were introduced. Were you the tall guy exhibiting the new OBi phones coming out later in the year? :)
##########
# D O N A T E # <-- Click here
##########
Very good. Made me smile.
I chatted with OBi and sent an email to sales@obihai.com, attention Sherman, on 9/6 complaining about this. I've had no response.
In short, I wouldn't recommend this device to anyone based on OBi's lack of support for this simple request, which they committed to prior.
I'm at 2774 on my 110 and have intention of ever updating unless GV makes a change that requires it.
ianobi:
affled,
I don't have the answer (that's a good start!). I can say that your ideas in Reply #6 will definitely not work. You will end up prepending *01 to the number and sending it out to sp2.
The Star Codes are designed to be intercepted by the OBi before they even reach the Phone Port DigitMap.
Sorry I cannot be of more help.
Navigation
[0] Message Index
[#] Next page
[*] Previous page