Eliminate Dialing delay??
frunple:
Thanks. I'll give it a shot.
frunple:
I didn't even realize it when I last posted.... I can't dial 7 digits, only 10 or 11.
I changed the dial plan to :
([2-9]11|[2-9]xxxxxxxxx|1xxxxxxxxxx)
Any problems with that? obviously it works but I just want to make sure I'm not missing anything.
RonR:
frunple,
That should be fine.
marcb:
Hello,
I also get a 4 - second pause when using my PSTN line. I am in Belgium and standard telephone numbers are 9 digits. I changed the default (US) setting as follows:
Physical Interfaces -> LINE Port -> DigitMap : (xxxxxxxxx)
which seems the simplest possible configuration, but to no avail. Can anyone help me please?
(Obi110 HW version 2.8 - SW version 1.3.0 (build 2532)
RonR:
Quote from: marcb on September 14, 2011, 02:24:30 am
I also get a 4 - second pause when using my PSTN line. I am in Belgium and standard telephone numbers are 9 digits
The delay you're seeing is normal:
DialDelay : 500 ms
DialDigitOnTime : 200 ms
DialDigitOffTime : 200 ms
500 ms + 9 x 400 ms = 4100 ms
IOW, from the time you dial the last digit, it takes 4.1 seconds for the OBi to go off-hook on the LINE Port and dial 9 digits out to your telephone company.
If you want to bypass the OBi when making PSTN calls, you could dial # to get a direct connection to the LINE Port and dial the digits directly to your telephone company instead of having the OBi do that dialing for you.
Navigation
[0] Message Index
[#] Next page
[*] Previous page