Star Code Not Working

(1/2) > >>

pitcritter:
I don't know what I've changed, but at one time, I could call *98 to retrieve voice mails from my SP1 (FreePhoneLine.ca).  I originally had to change the default definition of *98 (Blind Transfer) and change it to *99 to make it work, but it DID work.

Now, *98 gets me an immediate busy signal.

Here's my "Phone" OutboundCallRoute

{(Musefpl):sp1},{933:sp1},{911:sp1},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{sp2}

"usefpl" is a digitmap to use my SP1 to call numbers covered by my plan there.  Everything else is handled by GV.

(*98|x.905xxxxxxx|x.289xxxxxxx|x.416xxxxxxx|x.647xxxxxxx|x.437xxxxxxx)

When I dial *98, I get an immediate busy signal and nothing shows up under "Call Status".

Interestingly **1*98 works perfectly.

What is the simple thing I'm missing?

Everton:
Sounds as if your Primary Line is set to SP2......

pitcritter:
My primary line IS SP2, but I don't see where that comes into play.  My "usefpl" digitmap includes *98 and my Phone OutboundCallRoute is set to use SP1 for "usefpl" compliant numbers.

Am I misunderstanding a concept here?

azrobert:
I don't see anything wrong.

You can try this:
http://www.obitalk.com/forum/index.php?topic=6727.0

Shale:
Edit: the posts were more relevant.

Navigation

[0] Message Index

[#] Next page