Prefix with *31# Obi202

(1/4) > >>

mrjoe:
I'd like to reveal my CLI when calling through a calling card so I need to prefix some numbers dialed through ObiBT with *31#

I would put <*31#>037219xxx in the ObiBT digit map and change something in Phone 1 & 2 Outbound Callroute & Digit map but not sure what.

Can anyone help me with this please, I'm a bit out of it.

Thank you in advance

azrobert:
Don't change the DigitMap.

Put this at the beginning of the Outbound Call Route:
{(<*31#>037219xxx):sp1},

mrjoe:
Hi Azrobert - thank you for your reply.

I have put what you suggested in the Phone Outbound Callroute with 'bt' instead of 'sp1' and I'm still not having any success.

I have copied and pasted [^*#]@@. In to ObiBT DigitMap too just in case it will help.

azrobert:
Quote from: mrjoe on October 12, 2013, 09:22:07 am

I have put what you suggested in the Phone Outbound Callroute with 'bt' instead of 'sp1' and I'm still not having any success.


You are dialing from a BT device and sending the call out one of your SP trunks. Correct? If yes then why would you put bt in the outbound call route rule?

I don't have an OBiBT or an OBi202, so my understanding of BT might be wrong. My last post is how you would do it from a phone attached to the Phone Port. I'm assuming that OBiBT is the same except you need something like 037219xxx or xxxxxxxxx in your OBiBT digit map.

If I have this wrong, someone else please chime in.

mrjoe:
I'm dialing from my Phone port via a Cellphone connected through ObiBT to my Obi202.

Navigation

[0] Message Index

[#] Next page