News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

How to block a caller?

Started by Richards, October 17, 2013, 04:30:27 PM

Previous topic - Next topic

Richards

Quote from: QBZappy on October 20, 2013, 01:32:37 AM
$1=CALLER ID of incoming call. GV offers two voice channels. incoming call uses one voice channel, outgoing call to $1 (caller id) uses another. If by chance you receive a call while this is going on, then the call will fail (busy). At the moment there is no charge for using GV. If you used another service which charges for outgoing there would be a very small charge at the provider rate.

Good. Thanks for your very clear explanations!  Appreciate your patience and kindness very much. You will have a very good day!

azrobert

Quote from: Richards on October 18, 2013, 11:50:22 AM

Thank you too, Sir. But my VOIP provider "Freephoneline" doesn't seem to have this function to add some blocking numbers.

This quote would indicate the unwanted call is on SP1 and he is routing the call back on SP2. Only one channel is used on SP2, so he can receive a call on GV while this is happening.