OBI202 ring delay
Shale:
Lavarock7 did a nice job with the symptoms!
How about the delay from "headset of my phone ringing in" to the phone plugged into phone 1 jack? Is that 5 seconds shorter than for the phone on jack 2, as we would expect?
What is "headset of my phone ringing in"? Are you ringing in from Skype or some such?
Gavo:
The delay is on the 202 somewhere. When calling in from my cellphone as soon as I hear ringing a quick "beep" is heard on phone1 (and the CLID is displayed), then after hearing a further few rings, phone 2 starts to ring.
Cheers
Gavin
Gavo:
Another observation, the delay is directly attributable to the "CallForwardOnNoAnswerRingCount" (even if it isn't selected). I noticed this when I set the delay to 5 rings and the phone 2 (with phone 1 busy) took even longer to ring, set the delay back to the default 2 and the delay was shortened.
Played about a bit more and here is the result :-
If CallForwardOnNoAnswerRingCount has no value at all, then when phone1 is in use call immediately goes to phone2 with no delay whatsoever
However if phone2 is use then call just rings until phone2 clears down and then phone2 rings.
Effectively deleting this ringcount setting makes phone2 the default for incoming calls, the same effect is obtained by giving it a value of 0.
At the moment I have left the setting at 3 as a compromise setting.
Cheers
Gavin
Navigation
[0] Message Index
[*] Previous page