Obi 110: Block incoming numbers

(1/2) > >>

jillanddavid:
I've tried the following:

Physical Interfaces -> LINE Port

And set:
InboundCallRoute = {(1?800xx.|1?888xx.|1?877xx.|1?866xx.|1?855xx.|1?2023168196|1?5197664677|1?2892730228|1?5195269974):},{ph}

And it doesn't appear to be working. I've added my cell number to this list (although not included above :)) and tried calling and it got through ok. Can anyone advise what I'm missing?

cheers in advance!

Shale:
Try changing each 1? into x. .  I understand that it seems that 1? should be better.

azrobert:
Did you change the Line Port RingDelay parameter?

If the RingDelay is too low the OBi110 will not process the CallerID properly.

jillanddavid:
Thanks for the replies Shale & azrobert. Unfortunately neither did the trick.

I doubled RingDelay from 4000 to 8000 first to no effect. I then updated the InboundCallRoute to the following:
{(5191234567):},{ph}

Where 5191234567 is my cell number - and my cell was still able to call. I also tried:
{(x5194001318):},{ph}

I feel like the syntax above is maybe wrong in some way - any other advise?

Shale:
Have you checked your call history on the OBi110 to see what caller ID is being detected?

Navigation

[0] Message Index

[#] Next page