QuoteProblem:
I can receive incoming calls from the PSTN connected to the OBiLine module, but I receive a fast busy when trying to place a call on that line by dialing **70.
This looks like a configuration problem. Check your Phone Ports 1&2 DigitMaps and OutboundCallRoutes. They need updating to use OBiLine with **70 codes. The defaults should look like this (of course, you may have made changes to suit your own needs):
Physical Interfaces > PHONE Port 1&2 > DigitMap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli))
Physical Interfaces > PHONE Port 1 > OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<#:>):ph2},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Physical Interfaces > PHONE Port 2 > OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<#:>):ph},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}