911 and diabled line on 110

(1/1)

sailing:
I intend to drop my land line and use an e911 service. The 110 default is to have 911 calls go to the land line by default. If I disable the land line (PhonePort>enable uncheck), will a 911 call default to sp1 or do I need to add the 911 feature to the digimap for sp1? I will be using Voip.ms. With the PhonePort disabled, are there any other changes to the digimap that is needed?

Shale:
It should work as you want.

You can test your 911 setup by dialing 933 when done.

drgeoff:
I think that merely disabling the landline will NOT automatically cause 911 to go out on SP1.

ianobi:
When you configure Voip.ms on sp1 check the “Use This Service for Emergency 911 Calls” box.

If you wish to use the 933 test, then make sure that 911|933 are both in your Phone Port DigitMap (911 should already be there). Also change your OutboundCallRoute so it looks like this:

Physical Interfaces > PHONE Port > OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{(911|933):sp1},{(<#:>):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Navigation

[0] Message Index