Direct IP calls

(1/4) > >>

Cobi:
Just wondering, is it possible to make direct IP calls with the Obi100, without using Obitalk?
I.e. An Obi100 to a Cisco/Linksys ATA, based on IP address (assuming port forwards and all were set up in the router?)

If so, how?


Thanks!

azrobert:
Assuming SP2 is defined as SIP set a speed dial to:
sp2(anything@aa.aa.aa.aa:pppp)
aa.aa.aa.aa:pppp is the IP address and port number of the device you're calling.

Cobi:
That's great! I wonder if it would resolve a domain instead of an ip .... For dynamic ip..
So instead of the ip address, put domain.com:port#

hwittenb:
Yes you can use a dynamic ip such as one you might get from a Dynamic DNS Provider such as providers on this list:
http://dnslookup.me/dynamic-dns/

The Obi will do a DNS lookup.  Of course you have to keep the address up to date with your current ip address.

Cobi:
That's great!
Yeah, already do that with DDWRT, so all that would be required would be the specific port forwards, and to assign the device with a static local IP.

Powerful little device...

Navigation

[0] Message Index

[#] Next page