[SOLVED] Anveo new setup OBI202. Make calls but cant receive calls
Shale:
On your Anveo account, what is selected for
Phone Numbers > Manage Phone Numbers > Edit > Call Options (under Call Handler)?
For me it is "Use Call Flow", which lets me do neat things, but I presume that "SIP/ATA device connected: This Account: ATA" would work too.
kb9nvh:
I checkded and it said I had NO inbound callflow..so I made one...I'll see if this works tonight when I get home.
kb9nvh:
Still no luck...I found this blog that a guy shows how he set his up and he used port 5060 just. http://blog.paulisse.com/2013/09/caller-id-names-with-google-voice-anveo.html
I've reset everthing to what he showed and made sure I have an inbound callflow. reset teh OBI202...
Still nothing.
Shale:
Do you have a separate modem? If so, as a test, try connecting the OBi directly to the modem. Power-cycle both the modem and the OBi. If that works, you know you are dealing with a router setting issue. I understand you put the OBi into the DMZ, but getting the router out of the picture would be a more conclusive test.
If your modem and router cannot be separated, try your OBi at a friend's house as a test.
kb9nvh:
To took the router out of the equation all together and hooked the obi directly to my cable surfboard modem.
Navigation
[0] Message Index
[#] Next page
[*] Previous page