Backing Off Issue
swimman:
I've searched the net and tried different things to get this to work but to no avail. Therefore, my post here.
I have two lines on my Obi202 set up on SP1 and SP2. I recently acquired two phone numbers from Call Centric to use in conjunction with Google Voice/Obi. I set up both CC numbers on SP3 and SP4 but get the message 'Backing Off'. Like I said, I have confirmed all settings are correct as well as the google email and password.. I have also gone back and forth with CC support and they recommended I reset the Obi and move CC to SP1 (this is when I only had one CC number). I did this and CC worked but I could not get GV to work on SP2 and 3. I have since switched things back using SP1 and 2 for my GV numbers which works fine as I need those lines in operation. CC still shows backing off.
Anyone have recommendations other than the basics which I have already found on the web? Thanks in advance...
zapattack:
I believe that 'Backing off' terminology is generated when a GV connection attempt fails.
Are you sure you have set the SignalingProtocol under General to SIP
as well as entering the associated SIP Credentials (username/password)?
You did not mention if you are using the OBi dashboard, or entering the info direct to the web page.
swimman:
zapattack - thanks for the feedback. Yes, SIP is signified under General and my CC credentials are listed under Service Providers for SP3 and 4 but I still get Backing Off.
From what I have read, Backing Off is the GV servers not being able to connect. Perhaps I am missing something very simple and I'm no expert in these matters, but as of now, I cannot figure it out!
I used the dashboard to do the initial set up for CC and am using the web page to change everything else. Not sure where to go next although if I get a free weekend (need to phone during the week as one line if for business), I'm going to reconfigure the Obi to set CC on SP1, then the other CC number on SP2, then the first GV on SP3 and the second GV on SP4 (i've also read that it should be deleted from the dashboard which I did not do the first time). As already stated, I had issues when I initially tried this but this time may try by actually resetting the Obi with the reset button on the unit.
swimman:
Got it to work thanks to InetUser here on the board. A couple of Obi settings were off and now all works as expected. Thanks again!
Johnny:
Please provide more info as to how you got it working.
I'm having issues as well.
I just hooked up one of my Obi110's and I got Callcentric registered OK, but I've tried a few GV numbers and everything keeps coming up as "backing off".
I know the account passwords are good. I don't have two step authentication turned on, and I've made calls from these accounts, so why don't they connect?
I've had GV accounts on this Obi110 before that were working fine and I really haven't changed anything, so what could be the problem?
Thanks.
Update: After logging out of the Obi site and then logging back in, I saw a message box that said something to the effect that I was using an invalid or old password to try to log in to my gmail account. I was told to enter the correct password and sign in.
I have triple checked that I am using the correct password and yet it still says, "backing off", and won't connect.
Navigation
[0] Message Index
[#] Next page