OBI110 and DIDlogic Canada
DimaT:
Could some one help me to set up OBi110? I am a rookie and bit overwhelmed with info.
I would like to send all local calls from phone port (area codes 403 and 587),1-800, 311, 911 to my local phone line, the rest (1xxxxxxxxxx and 011xx.|xx.) should go via DIDlogic.
DIDlogic support states: "- Dial the full international number: 1-212-555-1212 (US), 44-208-500-0000 (London). Dialing 212-555-1212 won't work. Do not dial with 0 or 00 or 011 in front".
Could you pls tell me where I set up outbound line in setting and where to write digimap to filter a number?
azrobert:
Service Providers -> ITSP Profile A -> DigitMap
(44xxxxxxxxxx|1[2-9]xxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.)
Physical Interfaces -> Phone Port
DigitMap:
((Mli)|[1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))
OutboundCallRoute:
{(Mli):li},{(<011:>xx.):sp1},{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Primary Line: SP1 Service
Physical Interfaces -> Line Port
DigitMap:
(311|(403|587)xxxxxxx|18(00|88|77|66|55|44)xxxxxxx)
UK (country code 44) 12 digit number don't dial 011
All other international numbers dial 011 and the 011 will be removed before routing to SP1.
USA dial 10 or 11 digits. Prefix "1" will be added to a 10 digit number.
Phone Port DigitMap I added "(Mli)|". The rest is default.
Phone Port OutboundCallRoute I added "{(Mli):li},{(<011:>xx.):sp1},"
Area codes 403 and 587 are 10 digit numbers. Is this correct?
I did not test any of this.
DimaT:
It still does not work.
ALL calls goes to SP1 account now (1-800, 403-, 011-).
011 is not being deleted (I have dial 38056-xxx-xxxx, not 011-38056-xxx-xxxx)- but this is good - I will nit mistakenly get charged by my local telco.
Could you pls point me where error is?
azrobert:
How do you update the OBi110?
Do you login directly to the OBi110 via the Web interface?
Or
Do you login to OBitalk to make changes?
Check to make sure the changes you made are still intact or have they reverted back to the default values.
How many different countries do you call?
DimaT:
log in via local ip (192.168.1.xxx), log in- and made changes one by one, rebooting device after each one. I just entered everything one more time, rebooted, checked - everything there.
In phone port settings - primary line - if set up to SP1 - ALL call goes to DIDlogic, including my local cell phone (403-399-33xx). It does not delete 011 if I dial Ukraine (011-38-056-791-xxxx), thus DID logic denies connection. If I dial 38-056-791-xxxx it works just fine.
If I set Primary line to PSTN - all calls go to local line, nothing goes to DIDlogic.
In my understanding one should not dial 011 for Europe, below is exempt DIDLogis guide: from "
Correctly dialed:
442012345678 – United Kingdom
12125551212 – USA
19055551212 – Canada
4915151234567 – Germany
Incorrectly dialed:
011442012345678 or 00442012345678 or 02012345678 – this is NOT how you dial UK
2125551212 or 9055551212 – this is NOT how you call US/Canada, must dial with "1" in front."
I would prefer NOT to dial 011 at all (so by mistake it will not be connected by my very greedy telco).
I call local calls (Calgary- 403|587-xxx-xxxx), some US/Canada (1-xxx-xxx-xxxx), Ukraine, and Europe.
DIDLogic has very competitive rates and sound quality.
"
Navigation
[0] Message Index
[#] Next page