Obivoice (Intelafone) vs. Forthcoming Obihai Service?
ceg3:
Quote from: cluckercreek on February 07, 2014, 06:35:06 am
Quote from: TheoGeek on February 06, 2014, 08:43:49 pm
You can also make sure the X_MWISubscribe box is checked (in the SIP settings of whatever profile you have Obivoice set to) That's what I had to do...
Thanks for the suggestion. It was checked. Obivoice support told me that they did not provide support for the phone itself ??? That wasn't what I had asked as it was their MWI issue. Oh well.
If you choose not to run the auto-setup tool and manually configure the SP be sure the value for MWISubscribeExpires, below the check box for MWISubscribe, is set to 3600, not 360. Reboot and maybe MWI will work properly. I think Obivoice states they cannot support to a great extent manually configured setups.
cluckercreek:
Well, I used the auto configuration tool to the letter. No my phone doesn't work after reboot. I guess I'll delete and start fresh.
ceg3:
Quote from: cluckercreek on February 07, 2014, 12:32:33 pm
Well, I used the auto configuration tool to the letter. No my phone doesn't work after reboot. I guess I'll delete and start fresh.
Sorry that didn't work for you. In my case, once I reset all my OBiTALK settings for SP1 and then ran the auto-setup tool I had no issues. I only have an OBi100, so only two SP's, so SP2 is mine and SP1 belongs to Obivoice and I don't touch it. I do think you can create conflicts if you manually make changes to the SP Obivoice is on.
ceg3:
So, I am in an office a couple of hours each evening and I am used to GV ringing my mobile phone if someone called my GV number. Now that I am ported to Obivoice I was looking for a solution. I installed their mobile app and enabled Wi-Fi when arriving at the office. I then called my Obivoice number from an office phone and bam, my mobile phone rang instantly, displaying the Obivoice mobile app with the opportunity to take the call or ignore it. Very cool. It's really a kind of fun solution. I don't know about battery drain yet, but I only plan to enable the app when I am in similar situations.
cluckercreek:
Quote from: ceg3 on February 07, 2014, 03:44:38 pm
Quote from: cluckercreek on February 07, 2014, 12:32:33 pm
Well, I used the auto configuration tool to the letter. No my phone doesn't work after reboot. I guess I'll delete and start fresh.
Sorry that didn't work for you. In my case, once I reset all my OBiTALK settings for SP1 and then ran the auto-setup tool I had no issues. I only have an OBi100, so only two SP's, so SP2 is mine and SP1 belongs to Obivoice and I don't touch it. I do think you can create conflicts if you manually make changes to the SP Obivoice is on.
No problem! ;D I appreciate any and all help. I'm new to this stuff and need to learn. I take it just that way. I have it back up like before but no MWI. When I dial *123 I get my voicemail but I wish I could get the stuttertone. The light indicator would be nice but not necessary. I guess I'll play with it more as I go along.
Navigation
[0] Message Index
[#] Next page
[*] Previous page