obi202 access from lan

[reltub]

Hi,

I set up my new obi202 yesterday via the obitalk portal, and via the device's own web admin page.
My network is configured as

Cable Modem --- Obi 202 --- Router --- LAN

(Yes, I know that obi202 doubles as a router, I have my reasons).

Today, I tried to access the obi202 from the LAN and nothing. When I scan the device, I get the following:

Code Select Expand

# nmap -Pn 192.168.10.1

Starting Nmap 6.40 ( http://nmap.org ) at 2014-01-26 10:25 EST
Nmap scan report for obiconnect.com (192.168.10.1)
Host is up.
All 1000 scanned ports on obiconnect.com (192.168.10.1) are filtered

Nmap done: 1 IP address (1 host up) scanned in 201.58 seconds


Can someone tell me what is going on here? The device is online, I can phone through it and access it via the obitalk portal. Note that I did not configure it to be in bridge mode.

Thanks,
Leo

[reltub]

Stupid me. My VPN routes were in the way today.
The fix is to add a route to the obi202 through my router:

Code Select Expand


route add -host 192.168.10.1 gw 192.168.1.1