Getting Auto Attendant Set Up

<< < (2/2)

drgeoff:
That's what it should do.   :)  Shows your recording is being used instead of the default one in the OBi's firmware.

Your call is not getting through to the AA and possibly not even getting to your OBi.  Put 'ph' (without the quotes) back into Voice Services/SP1 Service/InboundCallRoute (or SP2 or 3 or 4 as appropriate for your setup) and try calling in again.  Until you can ring and talk to the phone connected to the Obi it is pointless to proceed further with AA.

Then replace 'ph' with 'aa' and call in.  You should hear your recorded prompt.

indiesalesrep1:
Changing it to aa did it for me! Thank you very much.

Navigation

[0] Message Index

[*] Previous page