Will Anveo Direct work with Obi devices?

<< < (2/2)

UserKL:
Never mind, I got it to work. The trick is to not leave AuthUserID blank, it will be used as your caller-id. Good luck people.

dpublic:
Quote from: UserKL on February 22, 2014, 03:22:43 pm

Never mind, I got it to work. The trick is to not leave AuthUserID blank, it will be used as your caller-id. Good luck people.


This would be to set the outgoing gateway.
How about for incoming calls?
Would you use a dynamic DNS service and give Anveo Direct this domain?
What setting on the Obi matches the user part of the SIP URL?

volkswagner:
I realize this is a very old thread, but I'm trying to
connect Anveo Direct with an obi200.

It seems authentication is required. I can't seem to get
a functioning trunk. I've tried no password, bogus password, etc.

Can anyone confirm if Obi devices can use IP Authentication
rather than user/pwd with SIP trunk provider.

I was going down the rabbit hole and though perhaps
a voice gateway would help, but it seems they require
user/password as well.

Cheers!

PS: FYI I'm mostly interested in Anveo Direct in this instance
for t.38 fax (not available with "regular" Anveo accounts).

Taoman:
This thread may (or may not) be helpful.

https://www.dslreports.com/forum/r29813957-Anveo-What-do-I-need-to-make-calls-with-Anveo-Direct

Navigation

[0] Message Index

[*] Previous page