Anveo Direct
ProfTech:
Unless they have removed the feature, Anveo actually has a feature that allows you to use "Anveo Direct" with any Obi, and it doesn't require that you have a static IP. It may be used with any "Normal" Anveo account. I tried it out a few months ago. Sorry I can't give you any setup details though. There is a catch, however. This service uses what they call "Platform minutes". If you are on their "free" account you are limited to I think 40 minutes of calls during a 24 hour day at the best rate. Anything over that you pay their standard low "Direct" rate plus somewhere around a penny a minute extra on top. AFAIK the 40 minute limit resets each day but I never really used the service.
Zopa:
Quote from: ProfTech on December 15, 2015, 05:59:15 pm
Unless they have removed the feature, Anveo actually has a feature that allows you to use "Anveo Direct" with any Obi, and it doesn't require that you have a static IP. It may be used with any "Normal" Anveo account. I tried it out a few months ago. Sorry I can't give you any setup details though. There is a catch, however. This service uses what they call "Platform minutes". If you are on their "free" account you are limited to I think 40 minutes of calls during a 24 hour day at the best rate. Anything over that you pay their standard low "Direct" rate plus somewhere around a penny a minute extra on top. AFAIK the 40 minute limit resets each day but I never really used the service.
Can you shed any more details on this? It looks to me that both Anveo retail and direct are pay as you go accounts. Are you saying I can use Anveo Direct (essentially sip trunk wholesale pricing) with Anveo retail and get their call handling?
Zopa:
Quote from: azrobert on December 15, 2015, 07:33:43 am
Add the following to beginning of the Phone Port OutboundCallRoute:
{(Mvg1):vg1},
Thank you for your help, it worked. What is the relevance of adding {(Mvg1):vg1}, to Phone1?
I'm moving along on my quest. I'm able to connect and connect calls via Anveo Direct, but I have no audio both ways. That includes the ring tones while the destination phone rings.
Because my Obi202 is behind a NATed router, I presume I must use STUN, which I already do. I have:
STUNEnable set to on and STUNServer set to stun.callwithus.com (I'm not sure if Anveo has it's own stun server, let me know if it makes a difference which one to use)
Zopa:
Never mind. I fixed the audio issue somehow. Thank you everyone.
drgeoff:
Quote from: Zopa on December 15, 2015, 09:05:38 pm
Never mind. I fixed the audio issue somehow. Thank you everyone.
For the benefit of others it would be appreciated if you document how to configure an OBi for Anveo Direct.
Navigation
[0] Message Index
[#] Next page
[*] Previous page