OBI 110 to OBI 110

<< < (2/3) > >>

drgeoff:
Quote from: giqcass on February 28, 2014, 12:37:09 am

It wasn't clear to me from the original question but if Obi110#1 has any phone handsets attached to it then you will want to make this mod to what azrobert suggested.

OBi110#1
Physical Interfaces -> Line Port -> InboundCallRoute:
{ph,pp(ob200222222)}


I don't see a reference anywhere to allows the dialing of the other extension either.


If you mean dialling other extensions from the phone at OBi #2 then Azrobert's post contains:

"When the phone on OBi110#2 is taken offhook it will get dial tone from the line port on OBi110#1"

which covers it.  The lines with '9999' in them do the work.

For anyone wanting to do this in the future, note that OBi #2 does not need to be an OBi110.  The cheaper OBi100 or any other OBi device to hand will suffice.

giqcass:
I had not understood the setup fonemax wanted.  When I read the post I didn't realize Obi110 #1 was connected to an extension on a larger PBX.  That also explains why azrobert left out the "ph" I had expected in the InboundCallRoute.  I read it a couple of times but for some reason I just wasn't getting it.

fonemax:
OK

So when you indicate a digit string plus .....default settings....... do you mean to leave the default settings EXACTLY as they are and simply insert the string, as indicated in front of what's there ??

Thanks

azrobert:
It should look like this.

DigitMap:
(<S0:9999>|[1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))

OutboundCallRoute:
{(<ob200111111*>9999):pp},{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

I set this up like you requested, but it might cause you problems. There will be a slight delay before you hear the dial tone from the PBX after the phone is taken off hook. Maybe a second. If you have a phone that you dial a number and then hit SEND, the call will probably fail.

I think a better setup is when you take the phone offhook, you will hear dial tone from OBi110 but any number dialed will be routed to the PBX.

Here is the setup:

OBi110#1

Physical Interfaces -> Line Port -> InboundCallRoute:
{pp(ob200222222)}

Voice services -> OBiTalk Service -> InboudCallRoute:
{200222222>(<#:>):li},{200222222>(XX.):li}

OBi110#2

Physical Interfaces -> Phone Port

DigitMap:
(XX.S4|[1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))

OutboundCallRoute:
{(<ob200111111*>XX.)|(<ob200111111*>#):pp},{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}


Voice services -> OBiTalk Service -> InboudCallRoute:
ph

Dial # to get dial tone on the PBX.
Any other dialed number will be routed to the PBX.

fonemax:
Like a champ !

How the hell do you get to know those digit string ????
I'm amazed !

Navigation

[0] Message Index

[#] Next page

[*] Previous page