3.0.1 (4303) Can No Longer Receive Calls
gderf:
If you have a bad configuration on the portal it will be pushed into you OBi rendering it inoperable all over again.
Also disable automatic firmware upgrading capability.
carl:
Quote from: gderf on March 03, 2014, 10:09:44 am
If you have a bad configuration on the portal it will be pushed into you OBi rendering it inoperable all over again.
Also disable automatic firmware upgrading capability.
That I was already advised to do and I changed that so it will hopefully not happen next time i do the reset. That's essentially the whole point of repeating it.
gderf:
The factory default setting for automatic firmware updating is enabled. If you don't disable this after resetting it, the latest build will applied sooner or later. That one doesn't work for me either.
You shouldn't even expose the OBi to the internet until this is disabled.
Mango:
Guys, remember that OBiTALK can update your firmware automatically, even if Automatic Firmware Update is disabled.
carl:
Quote from: gderf on March 03, 2014, 10:27:31 am
The factory default setting for automatic firmware updating is enabled. If you don't disable this after resetting it, the latest build will applied sooner or later. That one doesn't work for me either.
You shouldn't even expose the OBi to the internet until this is disabled.
Thanks for the tip. I really have to check the default values on the things i disabled.
Navigation
[0] Message Index
[#] Next page
[*] Previous page