3.0.1 (4303) Can No Longer Receive Calls
QBZappy:
Quote from: Koby on March 04, 2014, 02:27:32 pm
Quote from: BigJim_McD on March 04, 2014, 02:21:22 pm
Koby,
I have updated my OBi202 to the new firmware version Build: 4318. I also have X_EnforceRequestUserID enabled without any issues with either Vestalink or with voip.ms. I use OBiTALK to manage my Obi202, Obi100 and Obi110. I no longer use the “Oleg method”
I believe the recent changes of the firmware are to the OBi2XX models. The OBi1XX did not inherit the X_EnforceRequestUserID feature. If that is correct the "oleg method" is still relavant!
Ostracus:
Quote from: QBZappy on March 04, 2014, 10:41:05 am
This is the most vexing problem for consumers of the OBi product since day one. Over the course of time people have begged on bended knees, demanded forcefully, politely asked to no avail. There was a breakthrough at one time when it seems there was a genuine effort to inform of firmware changes. This was greeted with much enthusiasm. Obihai dropped it faster than a new years resolution to loose weight.
Hey that stuff is loose enough. Don't want it to fly free and put an eye out. ;D
MikeHObi:
Took the firmware on my Obi202. Configured Google Voice to forward via Anveo. Flipped the X_EnforceRequestUserID to true for SP1 (GV), SP2(Callcentric) and SP3(Anveo). Note the default appeared to be on for Callcentric and Anveo though I can't be sure if that only flipped because I forced it for SP1 (GV). In all cases I'm using the ObiTalk expert configuration pages.
First configure GV to forward through Anveo. Able to receive call, able to make call.
Second, configure GV to forward through Callcentric. Able to receive call, able to make call.
Third, configure to foward via google chat. Able to receive call, able to make call.
So I think I can say that Anveo, and Callcentric support this.
QBZappy:
Quote from: Ostracus on March 04, 2014, 04:16:31 pm
Hey that stuff is loose enough. Don't want it to fly free and put an eye out. ;D
Good one!
Mango:
3.0.1 (4330) for OBi2 & OBi3 Series: http://fw.obihai.com/OBi202-3-0-1-4330.fw
Restored the X_InboundCallRoute behavior as in 3.0.1.4269 and prior releases.
Specifically, the problem where the rule {>[Your Account UserID]:ph} is not working with
some service providers in 3.0.1.4303 and 3.0.1.4318 has been corrected.
Excellent!
Navigation
[0] Message Index
[#] Next page
[*] Previous page