Dial Tone prompts for each outgoing account

(1/3) > >>

N2VWZ:
My OBi100 is presently configured for 3 accounts:

SP1 Google Voice Line 1 (Default)
SP2 Google Voice Line 2 (**2)
Obitalk Network (**9)

Picking up the phone connects my telephone to Google Line 1 by default.

I would like to set up shortcuts to access each line quickly. For example;

I can program speedcall 8 to dial (**2) to connect my telephone to Google line 2.
I can program speed call 9 to dial (**9) to connect my telephone to the Obitalk network.

The problem here is that I would like a new dial tone to be present after dialing 8 and before dialing the 7 or 10 digit PSTN number on Google Line 2.  Likewise, if I dial 9 to make an Obitalk network call, I would like a new dialtone to appear after dialing 9 and before dialing the 9 digit Obitalk number.

How do I force a new dialtone to appear after dialing the SP2 or Obitalk access codes?

RonR:
Quote from: N2VWZ on April 23, 2011, 09:46:30 am

I can program speedcall 8 to dial (**2) to connect my telephone to Google line 2.
I can program speed call 9 to dial (**9) to connect my telephone to the Obitalk network.

I'm curious how you're doing this.  I don't seem to get anything interesting to happen by putting **n in a Speed Dial.

RonR:
Maybe you're putting the **n in your telephone's Speed Dial and not the OBi's Speed Dial.


To get a new dialtone after dialing **n, modify your PHONE Port Digitmap:

([1-9]x?*(Mpli)|[1-9]x?|911|**0|***|#|**1{t=di2}(Msp1)|
**2{t=di2}(Msp2)|**8{t=di2}(Mli)|**9{t=di2}(Mpp)|(Mpli))

N2VWZ:
Quote from: RonR on April 23, 2011, 10:32:57 am

Quote from: N2VWZ on April 23, 2011, 09:46:30 am

I can program speedcall 8 to dial (**2) to connect my telephone to Google line 2.
I can program speed call 9 to dial (**9) to connect my telephone to the Obitalk network.

I'm curious how you're doing this.  I don't seem to get anything interesting to happen by putting **n in a Speed Dial.

I haven't actually tried dialing full numbers.  I get silence after dialing 8 (**2).  I presume that it is waiting for an additional  7 or 10 digit number to be dialed.

RonR:
Quote from: N2VWZ on April 23, 2011, 10:56:56 am

I haven't actually tried dialing full numbers.  I get silence after dialing 8 (**2).  I presume that it is waiting for an additional  7 or 10 digit number to be dialed.

I can't get anything but a busy trying to use just **n in an OBi Speed Dial.

The second dialtone example I posted does work, however.  I've been using it here for some time.

Navigation

[0] Message Index

[#] Next page