News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

OBI202 2 lines incoming to ring one set of phone.

Started by Avatar, March 08, 2014, 11:59:31 AM

Previous topic - Next topic

Avatar

Calling the expert out there. As the title suggested, I have two numbers setup for SP1 and SP2 and a set of cordless phones. Wondering how to set the OBI202 so that incoming calls from SP1 or SP2 will both go to the same phone. Thanks in advance.

dircom

#1
do you use Obitalk to manage?
if so the settings are there to set which lines ring which Phone (1) or Phone (2)

Avatar

No.  I manage through the browser.  Any settings related to that?  Thanks.

drgeoff

You don't need to do anything.  The default setting is that all incoming calls (SP1, SP2 and Obitalk) are directed only to PHONE1.

Avatar

Well probably I had changed some settings. Just which setting, if anyone knows, that I have change to get it to work that way.

azrobert

Voice Services -> SP1 Service -> X_InboundCallRoute: ph
Voice Services -> SP2 Service -> X_InboundCallRoute: ph

Avatar

Just tried that and it worked perfectly. Thanks azrobert.

I actually had the following in the setting for both SP1 and SP2

{(@|@@|@@@|@@@@|@@@@@|@@@@@@):},{(1800xx.|1888xx.):},{ph}

Now I put a colon before ph.

{(@|@@|@@@|@@@@|@@@@@|@@@@@@):},{(1800xx.|1888xx.):},{:ph}

Thanks again.

drgeoff


Avatar

Oh. Really. But it seems to work that way. May be I'll try it without the colon again. I used to have two phones. One for SP1 and one for SP2 but never ring BOTH.