Obi100 - 2 Sips setup - how to

(1/2) > >>

vskatusa:
I am fully aware that you can configure 2 SIPS in Obi100 -ITSP Profile A & B.

1. Is my above understanding correct?
2. If so, how do you decide which SIP to use for outgoing calls?

gderf:
You set one or the other to be the Primary Line for Outgoing Calls, and/or you can dial **1 then the number to use SP1 or dial **2 then the number to use SP2.

vskatusa:
Hi gderf, thanks for your reply.

Quote

You set one or the other to be the Primary Line for Outgoing Calls

Can you kindly show me a screen shot of the web interface how I setup the Primary Line? or ITSP Profile A is always considered primary line?

gderf:
I believe you have to use the OBiTALK portal to set this. Have you tried that?

vskatusa:
I have used OBILTALK but I have configured using the local IP of the OBI100 - I believe I cannot use both. Am I right?

Navigation

[0] Message Index

[#] Next page