OBiwifi Wireless Adapter
Mack002:
1) I could connect using the Obiwifi wireless adapter and an Obihai 202 to callcentric.com and make and receive calls using firmware 3.0.1 build 4303.
2) I upgraded to firmware 3.0.1 build 4330 because callcentric recommended doing so.
3) Now I can no longer make calls using callcentric. I sent callcentric screen shots of my Obihai 202 configuration pages, and they said that the configuration was fine and recommended that I connect through a wired internet connection.
4) Why does the Obiwifi wireless adapter no longer work and what can i do about it? Would downgrading to build 4303 fix it?
Thanks; all suggestions appreciated.
drgeoff:
(I don't have an Obi202 nor an Obi Wifi.)
Are you receiving calls OK over WiFi with the 4330 build?
Does the wired connection work for making and receiving calls with the 4330 build.
If you want to know if the firmware downgrade will fix things, why not try it yourself?
Mack002:
Quote from: drgeoff on March 16, 2014, 07:00:54 am
(I don't have an Obi202 nor an Obi Wifi.)
Are you receiving calls OK over WiFi with the 4330 build?
Does the wired connection work for making and receiving calls with the 4330 build.
If you want to know if the firmware downgrade will fix things, why not try it yourself?
I can neither make nor receive calls using wifi. My callcentric account says that my device is not registered.
I don't have a wired connection now, so I do not know it the 4330 build works with a wired connection.
I'd like to revert to the 4303 build, but I don't know where to get the file. Any suggestions?
drgeoff:
Did you check the OBi's Wi-Fi connection after you did the upgrade?
What response do you get to dialling ***1 on the phone connected to the OBi?
Mack002:
Quote from: drgeoff on March 16, 2014, 07:49:33 am
Did you check the OBi's Wi-Fi connection after you did the upgrade?
What response do you get to dialling ***1 on the phone connected to the OBi?
I'm using a Verizon Jetpack model MHS291LVW for an internet connection; the Jetpack used to play well with the Obihai (before the upgrade). After the upgrade, the Obi took a long time to connect to the Jetpack, but eventually did. The Jetpack shows it as a connected device, the power light on the Obi is solid green. I can ping ping.callcentric.com from a computer connected to the same Jetpack.
When dialing ***1 the response gives me Obi's IP and states that DHCP is disabled. The IP given by Obi and the IP the Jetpack says the Obi is using are the same.
Thanks. I welcome further questions and ideas.
Navigation
[0] Message Index
[#] Next page