Issues upgrading the firware on Obi200
sidlog:
According to the note on the firmware upgrade it was stated that it is possible to invoke a firmware upgrade when devices that have been added to OBiTALK will see an associated yellow triangle which can be selected to invoke an automated update process.
Well, I see the yellow triangle, but when I press on it I simply open the post regarding the firmware update.
In addition, under "status" my device shows something like that ( please also take a look in the picture)
Registered (server=77.72.174.128:5060; expire in 29s)
Register Failed: 403 Forbidden (Bad auth) (server=46.19.208.89:5060; retrying)
How shall I resolve this ?
Sam
drgeoff:
1. There is more than one way to upgrade the firmware but for you the easiest is to start by dialling ***6.
2. Authorisation failure usually means wrong name or password.
sidlog:
I do not think it is related with wrong name or password could as I make / receive calls...
drgeoff:
Quote from: sidlog on March 19, 2014, 09:40:47 am
I do not think it is related with wrong name or password could as I make / receive calls...
If you can receive calls on a SIP account it must be registered.
giqcass:
Redacted! lol
Firmware authorization uses a different user name / Password combination. You didn't manually enter any info into any of the firmware update fields did you? What firmware version do you have?
Navigation
[0] Message Index
[#] Next page