Caller ID Forwarding

(1/6) > >>

Hadi:
Hello,

I have two obi110 devices. One is in my home (obi1) and the second one is in my office (obi2).
My landline (PSTN) connected to the obi1 and when someone called my landline number it transfers to my obi2. Is there any way to forward the original caller's Caller ID to my obi2? Right now the obi2 just shows the obi1 number.

Thanks

azrobert:
On OBi1
Change Line Port -> InboundCallRoute to:
{ph,pp(ob200222222)}

ob200222222 is your OBi2's OBi number.

Hadi:

  Thanks Azrobert for answering but I don't have any problem to transfer. So far all my callings can transfer to OBI2. The problem is the caller ID on OBi2 does not show the original caller's caller ID. It just shows the 200111111.

200111111 is my OBi1's OBi number.
 

QBZappy:
@Hadi,

Here is something azrobert wrote which may help you. You can find it in my Bookmark thread. CID spoofing is what you need. You may want to use an ip address instead of the OBi unit tel number for this to work. Have a look.

http://www.obitalk.com/forum/index.php?topic=7352.msg47664#msg47664

azrobert:
I have 2 OBi110s and my setup transfers the CID correctly using the OBiTalk network. I assumed you were using an SP trunk to transfer the call to the other OBi110. Are you transferring the call the same as I suggested?

Edit:

Can you tell me what services you have defined on the SP1 and SP2  on the work OBi110?

Navigation

[0] Message Index

[#] Next page