Change Outbound CallerID (Spoofing?)
threehappypenguins:
I recently signed up for Vestlink. Here is what is on my Obi202:
SP1: Freephoneline (primary line)
SP2: Google Voice (for now... until XMPP is disabled!)
SP3: TheSpout (this is my local phone number since FPL doesn't offer numbers out east)
SP4: Vestlink
I know that GV doesn't support spoofing, so whatever. But I want SP1 & SP4 to show SP3's phone number (my local number). I know for a fact that Vestlink offer's spoofing. Not sure about Freephoneline, but I'm able to at least successfully change the name that shows up on other people's caller ID.
Here is what I did:
Service Providers > ITSP Profile A SIP > X_SpoofCallerID (Enabled with checkmark)
Service Providers > ITSP Profile D SIP > X_SpoofCallerID (Enabled with checkmark)
Voice Service > SP1 Service > CallerIDName (I entered the name I wanted)
Voice Service > SP4 Service > CallerIDName (I entered the name I wanted)
Physical Interfaces > PHONE 1 > OutboundCallRoute > {([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<#:>):ph2},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1(1234567890>)},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4(1234567890>)},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Of course, 1234567890 being my 10 digit phone number that I want to show up on other people's call displays. And I did the same OutboudnCallRoute on PHONE 2.
Freephoneline still seems to function and call out properly, and it shows the proper call display name on other's phones, but it still shows Freephoneline's phone number. As for Vestlink, I get an error when calling out with that OutboundCallRoute: The number (the one I was calling) was rejected by the service provider. Reason: 407.
What am I doing wrong?
drgeoff:
Did you tick the box for 'X_SpoofCallerID' in Service Providers, ITSP Profile x, SIP?
threehappypenguins:
Quote from: drgeoff on March 21, 2014, 11:43:46 am
Did you tick the box for 'X_SpoofCallerID' in Service Providers, ITSP Profile x, SIP?
Quote from: threehappypenguins on March 21, 2014, 10:29:30 am
Here is what I did:
Service Providers > ITSP Profile A SIP > X_SpoofCallerID (Enabled with checkmark)
Service Providers > ITSP Profile D SIP > X_SpoofCallerID (Enabled with checkmark)
drgeoff:
Not clear if you had done that before or after I mentioned it.
Also, do we assume the spoofing is still not happening?
Regarding the Vestalink failure, googling reveals that SIP error code 407 indicates a proxy authentication error. Do the calls really succeed if you just remove that spoofing number part of PHONE OutboundCallRoute?
threehappypenguins:
Quote from: drgeoff on March 21, 2014, 01:22:51 pm
Regarding the Vestalink failure, googling reveals that SIP error code 407 indicates a proxy authentication error. Do the calls really succeed if you just remove that spoofing number part of PHONE OutboundCallRoute?
Yes, if I remove the "spoofing number part of PHONE OutboundCallRoute," I can call out perfectly fine; no problems. If I introduce the syntax again into OutboundCallRoute, it gives me the error again.
Navigation
[0] Message Index
[#] Next page