Using SP1 and SP2 on obi110. what happens when both ring at the same time?

(1/1)

et_phone_home:
I'm currently testing Callcentric free incoming service on SP2 and I have Vestalink set up on SP1. Googlevoice forwarding to both services.  When a call comes in. what does the Obi device do when both ITSP1 and ITSP2 ring at the same time?

Also, I would like to keep SP1(Vestalink) as the default outgoing service, where is this setting inside the Obi admin interface?
I would rather not use the Obitalk.com web interface, and prefer to do this manually.

giqcass:
The calls never actually come in at the exact same time.  There will be a slight time difference.  In my experience when forwarding Google Voice to 2 number both registered on the Obi one of the SP will win the call when you pick up.  If I remember correctly it was usually the first incoming call.  After you pick up you may hear a call waiting beep. You should only hear 1 at most.  Google need a second to realize the call was picked up and cancel the other call.

Assuming you never change the basic setting SP1 will be used for outgoing calls.

Just in case you want to make sure your setting is correct log in to the Obi using it's Ip address

Click
Physical intefaces
>>>>>>>>>>>>>>>Phone port1
Here you will see a setting "PrimaryLine"  Make sure it is set to the Sp you want to use for outgoing calls.

Navigation

[0] Message Index