December 14, 2019, 02:36:50 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Setting up callwithus.com  (Read 2821 times)
sorvani
Newbie
*
Posts: 6


« on: April 26, 2011, 07:14:56 am »

I am having a problem getting callwithus.com set up.

I had no problem doing it in FreePBX, but apparently the different syntax in the OBi110 is confusing me. I don't claim to be an expert by I can follow directions. Can anyone pont me to a good example to follow to set this up?

I use callwithus for calls to Japan because their rates are the same as everyone else for landlines, but usually much lower for mobile.
Logged
RonR
Hero Member
*****
Posts: 4527


« Reply #1 on: April 26, 2011, 08:43:57 am »

A minimal configuration of CallWithUs would be (from factory defaults):

Service Providers -> ITSP Profile A -> General -> STUNEnable : (checked)
Service Providers -> ITSP Profile A -> General -> STUNServer : stun.callwithus.com

Service Providers -> ITSP Profile A -> SIP -> ProxyServer : sip.callwithus.com
Service Providers -> ITSP Profile A -> SIP -> RegistrationPeriod : 120

Voice Services -> SP1 Service -> AuthUserName : username
Voice Services -> SP1 Service -> AuthPassword : password

Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service
Logged
tkc9789
Jr. Member
**
Posts: 45


« Reply #2 on: April 26, 2011, 04:21:56 pm »

Sorvani,
This sounds like the provider I've been looking for.  You mind sharing your working configuration after you have this working? Many thanks.
Logged
sorvani
Newbie
*
Posts: 6


« Reply #3 on: April 26, 2011, 10:32:00 pm »

The above information is all I entered into my 110 and it registered with CallWithUs just fine. Placed a test call with no issues.

Will report back with any issues after we call the parents a few times.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC