Bought a Raspberry pi to go with my OBi
azrobert:
drgeoff,
My Raspberry Pi was delivered on Saturday, 2 days ahead of schedule. I already flashed my SD card with Raspbx, so I was up within minutes using the PSU from my tablet.
I then tried my homemade cable and it was too weedy. My router could see Raspbx, but I couldn't login. I took your advice and reduced the length of the patch cable from 40 inches to 5. I cut off the barrel connector from the PSU and soldered the wires together. I slide a piece of black irrigation tubing over the patch and it almost looks like a real cable. It now works perfectly. I even got my wireless adapter working, so now the only cable to the Raspberry Pi is from the power supply.
I would have never thought of reducing the length of the patch cable, so THANK YOU soooo much!
drgeoff:
Have fun and when you want to temporarily try something different, remember that you only need to pop in another SD card.
azrobert:
I finally got my Raspbx configured. I tested comparing SipSorcery and the GV callback apps on Raspbx. I used Phonerlite to connect to SipSorcery or Raspbx. Both used the same IPComms DID. I measured the time it took to ring a phone connected to a 2nd GV number and I used a stopwatch app on a tablet to measure the elapsed time. The times varied from call to call. Here are the rough numbers.
SipSorcery - Consistently under 5 seconds
Phyton GV - Approx 8 seconds
PHP GV - Approx 9 seconds
I am routing the DID thru SipSorcery and then to Raspbx. I did it this way so I could use the same DID for both SipSorcery and Raspbx. I should be able to cut a few milliseconds off the above times if I route the DID directly to Raspbx. To eliminate any possible problem with my wireless adapter, I remove it and hard wired Raspbx to my router. I got similar numbers.
I'm using IncrediblePBX and I did an upgrade, so the software is current on Raspbx. I ran a Speed Test on my network and got 32 Mbps download and 19 Mbps upload.
If nothing changes I will be using SipSorcery (NOT Raspbx) and CircleNet for backup. I'm still hoping the Asterisk community will devise a Hangouts solution.
giqcass or anybody else,
Can you time the Raspbx GV callback app and post the times you're getting?
Thanks
noobee:
Quote from: giqcass on April 05, 2014, 09:33:31 pm
I bought the CanaKit Raspberry Pi model B with clear case and USB Power Supply. I'm thinking about throwing incredible PBX on there. I've got an Obi110 and a Obi202 I'll hook up to it. Just waiting on delivery. This should hopefully provide weeks of tinkering fun.
Hey Giqcass -
Do you have any step-by-step guide to install Incredible PBX on RasPi? and also connection layout in reference to Obitalk and DECT phone. Is there any way to continue using Google Voice to make free calls with this set up? I am trying to follow nerdvittles blog, but being newbie, I am struggling.
drgeoff:
Quote from: noobee on May 19, 2014, 10:22:53 am
Quote from: giqcass on April 05, 2014, 09:33:31 pm
I bought the CanaKit Raspberry Pi model B with clear case and USB Power Supply. I'm thinking about throwing incredible PBX on there. I've got an Obi110 and a Obi202 I'll hook up to it. Just waiting on delivery. This should hopefully provide weeks of tinkering fun.
Hey Giqcass -
Do you have any step-by-step guide to install Incredible PBX on RasPi? and also connection layout in reference to Obitalk and DECT phone. Is there any way to continue using Google Voice to make free calls with this set up? I am trying to follow nerdvittles blog, but being newbie, I am struggling.
Are you struggling with the whole RPi thing or only the Incredible PBX installation?
Did you start at the link I gave in the second post of this thread?
What exactly is your question about OBiTALK and DECT phone?
Navigation
[0] Message Index
[#] Next page
[*] Previous page