Bought a Raspberry pi to go with my OBi
corporate_gadfly:
I didn't mean to say follow twinclouds guide in its entirety. Sorry for the misunderstanding. The general concepts still apply.
make sure forwarding number exists in GVmake sure gvoice runs from command-lineonly then proceed to modify asterisk config files, etc.
A somewhat more recent pygooglevoice can be found here. I had good luck with it, out of the box (so to speak).
@azrobert: Insert code button might help with the formatting. E.g.Code:
some nifty code lines
Usetheforceobiwan:
Quote from: noobee on May 22, 2014, 05:42:35 am
Now that Raspbx and Incredible PBX are installed and my RPi is accessible via SSH, wondering what should be my next steps for setting up Google Voice + Obi = Free Incoming/Outgoing calls. ::)
Setup your Obi as an extension and FXO link per the articles here: http://tech.iprock.com/?p=6431 and here: http://tech.iprock.com/?p=3208. When I figured out how to do both, I thought it was the coolest thing ever :)
azrobert:
Quote from: corporate_gadfly on May 22, 2014, 09:59:23 am
@azrobert: Insert code button might help with the formatting. E.g
Done.
Thanks for the suggestion.
noobee:
I followed nerdvittles closely and carefully and everything is up and running!!!
I am stuck while setting up hylafax. Added Trunk (Callcentric and Google Voice) exclusively for receiving faxes, but while adding inbound route, I don't see Custom Destination "Fax" in the list, as shown by nerdvittles..
Am I missing anything?
Navigation
[0] Message Index
[*] Previous page