CircleNet would like to introduce ourselves to the Obi world
Sam_from_CircleNet:
zorlac,
That is a good idea we're trying to put together a wiki and next weekend we're putting up a forum for CircleNet users. Also I'm a little fish in the telco world and you guys are my customers so your suggestions all rate as large on my fish-o-meter.
Sam
azrobert:
zorlac,
Try this:
DigitMap: ((Mvg1)|[1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli))
I assume your VG1 DigitMap looks something like this:
(1xxxxxxxxxx|<1>xxxxxxxxxx|<1919>xxxxxxx|011xxxxxx.S3)
(Mpli) in the Phone DigitMap points to the primary line DigitMap, so you also have to remove any offending rule there.
azrobert:
ianobi,
Good point about 911. If you're in the middle of a heart attack and dialing slowly, you will go to speed dial #9.
All my phones are the type where you dial the number then hit Send/Talk, so I don't think this applies to me.
zorlac:
Quote from: azrobert on April 26, 2014, 08:18:07 am
zorlac,
I assume your VG1 DigitMap looks something like this:
(1xxxxxxxxxx|<1>xxxxxxxxxx|<1919>xxxxxxx|011xxxxxx.S3)
(Mpli) in the Phone DigitMap points to the primary line DigitMap, so you also have to remove any offending rule there.
SP1 is still on GV
I haven't messed with that under the threat of potential spousal retribution. :o
ITSP Profile A
DigitMap: (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
"next weekend we're putting up a forum for CircleNet users."
Oh baby, I love forums! ;D
That will be a big help Sam, thanks!
azrobert:
You should also be getting the long pause with GV.
Try this:
ITSP Profile A
DigitMap: (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.S3)
I'm comfused. Are you still using GV on SP1? If yes, how do to dial numbers for GV? Do you use prefix "**1"? How do you dial numbers for routing to CircleNet?
Please post your VG1 DigitMap.
My last suggestion might have a flaw and prevent you from using CircleNet.
Navigation
[0] Message Index
[#] Next page
[*] Previous page