CircleNet would like to introduce ourselves to the Obi world
voiper1:
Quote from: classpro on April 29, 2014, 11:10:22 am
I don't see anywhere to put my Outbound Caller ID. Where do I enter the phone number I want to spoof for my calls?
I can tell you regarding this go to the CircleNet login and then go to 'Add Caller Id' on the left menu. Then add it there. All the other questions I am not sure. I know Sam is programming more functionality in as he can.
Cheers... ;)
Sam_from_CircleNet:
Welcome aboard,
You can put your CallerID into the CallerID section of the user portal, whatever number you add in there is the number that your calls will appear to come from. I understand the wording on the interface is a little confusing and we're working on that one.
We can setup multiple SIP profiles here at CircleNet for your account and assign different callerIDs to them. I think you could configure the Obi to use different SIP credentials for different voice gateways. To do this open a ticket with in our support system and include the numbers you'd like for CallerID and we'll build the SIP profiles.
And yeah the Obi forum does kick butt ;D
classpro:
It allows multiple caller IDs on that page (I thought it was for being able to log in). Anyway, I'll just list one of them and see if it works. Once it's working we can see about adding different profiles for different caller IDs. It would be nice if we could figure out how to do that eventually. Thanks.
Sam_from_CircleNet:
FYI we here at CircleNet are aware of an issue with deleting callerIDs from the customer portal after they are entered. Were working on a fix and hope to have it in place on Saturday, if you have a stubborn CallerID on your account that refuses to delete please open a ticket and we will get it for you.
Sam
classpro:
Circlenet stopped working when I assigned Callcentric to Sp1 and Sp2. I initially set up callcentric on SP2 and had GV on SP1, and used the instructions from the beginning of this thread for setting up a Circlenet voice gateway. I think Circlenet worked when I dialed out.
Then I deleted GV from SP1 and replaced it with a second callcentric line for SP1. So I now have two different callcentric numbers set up on SP1 and SP2, and both work.
However, Circlenet will not call out. I want Circlenet to call out on all calls.
In the instructions, it says to use "AccessNumber: sp2(outbound.circlenet.us)"
Does this "sp2" need to be changed so that circlenet will work with sp1 and sp2?
Is there something else that needs to be changed? I'm using
Access Number: sp2(outbound.circlenet.us)
Digimap: (1xxxxxxxxxx|<1>xxxxxxxxxx|<1315>xxxxxxx|011xxxxxx.S3)
AuthUserID: Username (not the secret number, right? Same number as "Card")
Password: same as web login password
Thanks. I feel like I'm close to getting this working.
Navigation
[0] Message Index
[#] Next page
[*] Previous page