CircleNet would like to introduce ourselves to the Obi world
classpro:
Sam:
I've spent some time today trying to diagnose why it won't work. I tried setting up the phone port calloutroute with just
{(Mvg2):vg2},
or
{(Mvg3):vg3},
rather than nesting the phone port calloutroute. It still didn't work.
Then I changed the digitmap on Voice Gateway 2 and 3 from
(<8:>1xxxxxxxxxx|<8:1>xxxxxxxxxx|<8:1315>xxxxxxx|<8:>011xxxxxx.S3)
to
(1xxxxxxxxxx|<1>xxxxxxxxxx|<1315>xxxxxxx|011xxxxxx.S3)
and it worked.
So the problem is the voice gateway digitmap. I'm using the one posted for google voice, so I don't know what is wrong, but that digitmap seems to be the bottleneck. When I use the digitmap calls don't go through.
Does anyone know what the "S3" at the end is - does that need to be changed?
I saw on an earlier post saying to add 8xxxxxxxxxx| to the phone port digitmap. I tried that, but it didn't help.
I think we should see if we can get the 7 and 8 prefix strings working by themselves, and then try nesting the phone port outboundcallroute.
voiper1:
Quote from: classpro on May 02, 2014, 09:40:12 am
Sam:
I've spent some time today trying to diagnose why it won't work. I tried setting up the phone port calloutroute with just
{(Mvg2):vg2},
or
{(Mvg3):vg3},
rather than nesting the phone port calloutroute. It still didn't work.
Then I changed the digitmap on Voice Gateway 2 and 3 from
(<8:>1xxxxxxxxxx|<8:1>xxxxxxxxxx|<8:1315>xxxxxxx|<8:>011xxxxxx.S3)
to
(1xxxxxxxxxx|<1>xxxxxxxxxx|<1315>xxxxxxx|011xxxxxx.S3)
and it worked.
So the problem is the voice gateway digitmap. I'm using the one posted for google voice, so I don't know what is wrong, but that digitmap seems to be the bottleneck. When I use the digitmap calls don't go through.
Does anyone know what the "S3" at the end is - does that need to be changed?
I saw on an earlier post saying to add 8xxxxxxxxxx| to the phone port digitmap. I tried that, but it didn't help.
I think we should see if we can get the 7 and 8 prefix strings working by themselves, and then try nesting the phone port outboundcallroute.
Hi, you have to read all the threads carefully. The 8 was used because the person wanted to used GV on sp1 and callcentric on sp2 but then wanted to change over after May14th. So the 8 was just temporary. Better to remove GV all together from the OBI and get it working right at this time since GV going away anyways.
The notes on the CN website are helpful but that is for an SP1 setup not a Voice Gateway. It is important to read all on here carefully. Sam is focused on upgrading features right now. They will add more to the website I am sure. Some of this is trial and error. There is nothing else to change on the digitmaps at the moment once it is working. As CN adds more features then digitmaps might change, or as azrobert can help you if there is anything special that you need done. He has been helpful to us all. I hope that helps. azrobert will help if you ask him.
Cheers... :D
classpro:
voiper1: Yes, I think I've read the entire thread several times, and as I stated in prior posts I do not have google voice at all on my obi. I have sp1 and sp2 both set to callcentric DID numbers.
I want to have all outbound calls going through Circlenet. I have a working Circlenet account, with two working number spoofing sub accounts. What I can't get working is a way of dialing out with those sub accounts.
I have tried to use the "8" and "7" digimaps from the google voice discussion to access the CircleNet subaccounts, but it doesn't work.
I have also tried using "**1" and "**2" instead of "8" and "7" to access the voice gateways with the sub accounts but it also does not work. I'm trying to use my limited understanding of the logic of the GV mapping to make it work, and it doesn't, so I'm asking for help. If you can help, I'm all ears. But telling me to read the thread is not helping.
voiper1:
Quote from: classpro on May 02, 2014, 11:28:32 am
voiper1: Yes, I think I've read the entire thread several times, and as I stated in prior posts I do not have google voice at all on my obi. I have sp1 and sp2 both set to callcentric DID numbers.
I want to have all outbound calls going through Circlenet. I have a working Circlenet account, with two working number spoofing sub accounts. What I can't get working is a way of dialing out with those sub accounts.
I have tried to use the "8" and "7" digimaps from the google voice discussion to access the CircleNet subaccounts, but it doesn't work.
I have also tried using "**1" and "**2" instead of "8" and "7" to access the voice gateways with the sub accounts but it also does not work. I'm trying to use my limited understanding of the logic of the GV mapping to make it work, and it doesn't, so I'm asking for help. If you can help, I'm all ears. But telling me to read the thread is not helping.
HI there, I am sorry you misunderstood my comment. I was not trying to help you with an answer because I do not know your answer. I simply was making sure you understood what was previously written. I had to battle through this also. Please ask azrobert as he is the one who helped me. Please try not to be too sensitive. This is all a learning experience for us. The best part is in time you will get it working. It can be frustrating. I have 20 years of engineering experience and even I am lost on the OBI most of the time.
Cheers. :D
classpro:
I'm not that sensitive, and agree that it's quite difficult for someone who is new to programming the device. We're all here to help each other get the most out of our device.
I suspect there are a number of others in my situation that would benefit from a clear explanation, which I will post if I get it working. I'm at the point where I understand what I don't understand, which is an improvement from where I started :-)
Navigation
[0] Message Index
[#] Next page
[*] Previous page