CircleNet would like to introduce ourselves to the Obi world
Jumbo:
azrobert.. need your expertise in suggesting a way to route only international calls - starting with 011 or digits > 11 to use voice gateway and local calls through the configured SP. Is there a way to specify so that I can use a different voip provider for international calls.
Thanks in advance!
Quote from: azrobert on April 18, 2014, 10:11:47 am
Quote from: Jumbo on April 18, 2014, 07:03:18 am
Quick followup question on this.. if CallCentric is registered as SP2 and if I want to use CircleNet as outbound on SP2, what changes do I need to make?
Appreciate the help, thanks!
You can share an SP trunk with 2 services by using a Voice Gateway.
Voice Gateways are used with outbound only providers that don't need to register.
CircleNet fits this category.
Keep GV on SP1.
Define Callcentric on SP2
Define CircleNet on Voice Gateway 1:
Voice Services -> Gateways and Trunk Groups -> Voice Gateway1
Name: CircleNet
AccessNumber: sp2(outbound.circlenet.us)
DigitMap: (<8:>1xxxxxxxxxx|<8:1>xxxxxxxxxx|<8:1aaa>xxxxxxx|<8:>011xxxxxx.S3)
AuthUserID: Your_CircleNet_ID (10 digit ID)
AuthPasssword: Your_CircleNet_Password
aaa is your local area code. This is used for 7 digit dialing.
Add to the beginning of the Phone Port OutboundCallRute:
{(Mvg1):vg1},
Continue to use GV as you are currently.
To use CircleNet dial as follows:
814805551212 or
84805551212 or
85551212 or
8011............
After May 15th change the Voice Gateway DigitMap to:
(1xxxxxxxxxx|<1>xxxxxxxxxx|<1aaa>xxxxxxx|011xxxxxx.S3)
Dial without the "8" prefix to use CircleNet.
[/quote]
azrobert:
Voice Gateway 1 DigitMap:
(011xxxxxxxxxx.S3|xxxxxxxxxxxxx.S3)
Add to the beginning of the Phone Port OutboundCallRoute:
{(Mvg1):vg1},
International or calls with 12 or more digits will be routed Voice Gateway1.
All other calls will be routed out your Phone Port Primary Line.
Jumbo:
Thanks azrobert!
Quote from: azrobert on May 21, 2014, 11:49:49 am
Voice Gateway 1 DigitMap:
(011xxxxxxxxxx.S3|xxxxxxxxxxxxx.S3)
Add to the beginning of the Phone Port OutboundCallRoute:
{(Mvg1):vg1},
International or calls with 12 or more digits will be routed Voice Gateway1.
All other calls will be routed out your Phone Port Primary Line.
azrobert:
Quote from: Jumbo on May 21, 2014, 02:07:21 pm
Thanks azrobert!
I forgot something.
Add the following AFTER the beginning parenthesis of the Phone Port DigitMap:
(Mvg1)|
Sam_from_CircleNet:
Hello Obi community,
CircleNet put in some major code changes under the hood early this morning with the goal of reducing the amount of time between when you dial a number and that number begins ringing. Please let us know if these changes are helpful!
Thanks,
Sam
Navigation
[0] Message Index
[#] Next page
[*] Previous page