Help setup SP2 for Callwithus

(1/3) > >>

tkc9789:
Just received my new toy about an hour ago.  Got GV setup as provider #1 for U.S. dialing without issues.  I plan on using "callwithus" as provider #2 for international calling.  I'm totally lost on how to set that up.  The following are sip client configuration copied from callwithus page:

Configuration parameter   Value
SIP server (or proxy, or domain)   sip.callwithus.com
SIP proxy (or "Outbound Proxy")   leave blank
STUN server   stun.callwithus.com
Username (or User ID)   username
Password   password
Auth name (or Auth ID)   username
Display Name   Your name
Register (or Send registration request)   Yes

Where in the Obi110 do I configure these parameters?  I clicked on "generic service provider" and doesn't even look close.  Help please.  Thanks.

RonR:
Service Providers -> ITSP Profile B -> General -> STUNEnable : (checked)
Service Providers -> ITSP Profile B -> General -> STUNServer : stun.callwithus.com

Service Providers -> ITSP Profile B -> SIP -> ProxyServer : sip.callwithus.com
Service Providers -> ITSP Profile B -> SIP -> RegistrationPeriod : 120

Voice Services -> SP2 Service -> X_ServProvProfile : B

Voice Services -> SP2 Service -> AuthUserName : username
Voice Services -> SP2 Service -> AuthPassword : password

tkc9789:
Ron,
How do I get to "service providers" and "voice services"?   

RonR:
These settings are in the Obi.  You access the OBi with your browser pointed to the IP address given by dialing ***1.  It should be obvious from there.

Be aware that to configure your OBi manually/locally, you will also have to disable Auto Provisioning at:

System Maintenance -> Auto Provisioning -> Auto Provisioning -> Method : Disabled

This will preclude using the OBiTALK configuration facility.

tkc9789:
Quote from: RonR on April 27, 2011, 05:29:57 pm

These settings are in the Obi.  You access the OBi with your browser pointed to the IP address given by dialing ***1.  It should be obvious from there.

Be aware that to configure your OBi manually/locally, you will also have to disable Auto Provisioning at:

System Maintenance -> Auto Provisioning -> Auto Provisioning -> Method : Disabled

This will preclude using the OBiTALK configuration facility.

Ah. Got it.  Thanks very much for the help.

Navigation

[0] Message Index

[#] Next page