PhonePower Slow Call Setup
xincedar:
I login to obitalk account and goto obi expert configuration menu. In the menu there are 3 buttoms
Enter OBi Expert
Reset OBi Expert Config
Revert to OBiTALK
I clicked "Enter OBi Expert", the digitalMap is:
(1xxxxxxxxxx|[2-9]xxxxxxxxx|011xx.|xx.|'*0'|(Mipd)|[^*#]@@.) that is different from the obi110 device - (**|[3469]11|0|00|1xxxxxxxxxx|<1>[2-9]xxxxxxxxxS0|*21|*53xxxx|*6[27]xx.|*[789]2xx.|*73|*74[0-1][0-9]*xxxxxxxxxx|*75[0-1][0-9]|011xx.|xx.|(Mipd)|[^*#]@@.|1xxxxxxxxxx|[2-9]xxxxxxxxx|011xx.|xx.|'*0'|(Mipd)|[^*#]@@.). Need help.
igal:
This worked for me:
From obitalk.com set it to:
(**|[3469]11|0|00|1xxxxxxxxxx|<1YYY>[2-9]xxxxxx|<1>[2-9]xxxxxxxxxS0|*21|*53xxxx|*6[27]xx.|*[789]2xx.|*73|*74[0-1][0-9]*xxxxxxxxxx|*75[0-1][0-9]|011xx.|xx.|(Mipd)|[^*#]@@.|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
Where YYY is area code if you wish to use 7 digits dialing.
lowatts:
I just found something interesting while testing my phone this morning, trying to reduce the call setup time. It is taking about 8 seconds after outbound dial tones before I hear a the ring tones start on my PhonePower line to my cell phone, whereas it was much less on my GV line. But then I noticed even though on the GV line the ring tones started sooner, the phone at the other end, in this case my cell phone used for testing the calls, didn't start ringing until after a few seconds delay, so that in reality it is taking about the same amount of time to make a connection whether using PP or GV. The PP just seemed to take longer because it did not play any ring tones until the phone at the other end started ringing.
xincedar:
Hi igal,
I went to obitalk.com and clicked "Enter OBi Expert" buttom, but I was not allowed to change the digitalMap value. How did you do it?
Thanks
igal:
@xincedar uncheck the two checkboxes defaulting the settings.
PP is pretty smart seems. If you've got a number that doesn't match the digimap, your obi will have PP do the math. E.g. - 611 is configured by the digimap here. Call will be routed very fast by obi. Try 511 which is not, obi will mumble and pass the baton to PP. That's why I think it takes more for some number formats in obi+PP scenario.
Navigation
[0] Message Index
[#] Next page
[*] Previous page