Switched from GV to PhonePower - intermittent "not configured"
PeteMoss:
I too was getting intermittent configuration error recording when initiating calls after switching from GV to Phonepower that temporarily cleared after rebooting my OBI202. Note that I have OBITalk Provisionig disabled so I could change the convoluted dialing plan the OBI/PP setup wizard gave me. I also wanted to make some other changes that should not have affected service. It seemed like every morning I would have to reboot the Obi202 to temporarily restore service again. After much researching, I saw a post where one individual solved the intermittent service by setting up a static IP address for the OBI WAN. I did this and for 3 days now, the problem has been solved. Note that on the same WD N900 router, I have a VOIPo account on a different OBI202 and it has (and is) been working for over a year using DHCP. I don't know why this work around has solved the problem but if it fails, I'll report back.
CheapSk86:
Just for a follow up: I signed up about 3 weeks ago and have been using PP since. I am on the phone every day for a minimum of 20 minutes, though mostly toll-free numbers. So far I have not had any intermittent connection issues, service or call quality issues, or drops.
I am using an OBI202 with the latest released firmware, the standard connection setup when you sign up for PhonePower through the Obi dashboard, and am using PhonePower currently for both toll-free and standard calls.
I posted a small review with additional information and feedback in another thread:http://www.obitalk.com/forum/index.php?topic=8197.0 for anyone who cares about a little more.
Based on the experience so far, I will be sticking with PhonePower for my needs.
PeteMoss:
Quote from: PeteMoss on June 01, 2014, 10:30:17 am
I too was getting intermittent configuration error recording when initiating calls after switching from GV to Phonepower that temporarily cleared after rebooting my OBI202. Note that I have OBITalk Provisionig disabled so I could change the convoluted dialing plan the OBI/PP setup wizard gave me. I also wanted to make some other changes that should not have affected service. It seemed like every morning I would have to reboot the Obi202 to temporarily restore service again. After much researching, I saw a post where one individual solved the intermittent service by setting up a static IP address for the OBI WAN. I did this and for 3 days now, the problem has been solved. Note that on the same WD N900 router, I have a VOIPo account on a different OBI202 and it has (and is) been working for over a year using DHCP. I don't know why this work around has solved the problem but if it fails, I'll report back.
After 3 days the problem surfaced again requiring another reboot. I have made some other changes and will advise.
Navigation
[0] Message Index
[*] Previous page