OBi202 OBiTalk Portal Firmware Check?

(1/3) > >>

wabashtrail:
Where do I find the firmware version in the ObiTalk Portal?

Everything I'm familiar with is working at this time so I'm not sure if I should update, but I would like to know what version I'm using.

gderf:
It's under Status | System Status in the Expert Configuration menu.

wabashtrail:
Thanks gderf,  Currently using 3.0.1(3722)
Should I upgrade, or is it better left alone?

gderf:
To upgrade or not to upgrade......

I'd say unless there is a bug in your current version that is solved in an available upgrade, then don't upgrade.

The problem is that there aren't usable change logs that say what bugs are fixed in which specific versions.

BruceB:
I also have an OBi202 (for about a month, connected to my LAN with an OBiWiFi), and received an Email about the firmware upgrade.  Attempting to follow the directions gets me nowhere:
In my Obitalk account, the device configuration does not show a "Firmware update" icon.  (Perhaps my device is new enough not to need one?)Under Status/System Status in the Expert Configuration menu, it shows ModelName, MACAddress, SerialNumber and OBiNumber, but no firmware version.Probing further, I found, on page 28 of the OBi Device Admin Guide, a section called "Web Server-Based Local Configuration" with a subsection "Access the OBi Device Management Web Page".  Following the instructions there, I can get the local IP address (by dialing ***1), but when I put that IP address into either Chrome or Firefox, it returns "The requested URL was not found!".
Any insight into any of these 3 issues would be appreciated.

Navigation

[0] Message Index

[#] Next page